Helikon Levanter Packable Jacket

Helikon Levanter Lightweight Wind & Water-Resistant Anorak｜DWR C0 · PU 10K/10K — Urban／Outback

Helikon Levanter is a lightweight, packable shell built for sudden weather shifts. The face fabric uses DWR C0 (PFAS-free) for water repellency, while the inside carries a 10,000 mm / 10,000 g/m²/24h waterproof–breathable PU coating—balancing short-burst rain protection with moisture management during movement. A 3/4-length zipper speeds on/off and boosts ventilation; the dual-side-zip kangaroo pocket keeps essentials instantly accessible; and the adjustable hood conforms to your head for improved wind and rain coverage. As an everyday EDC rain shell, it packs small, weighs little, and offers excellent value.

• DWR C0 Water Repellency (PFAS-free)
  Forms a beading layer so raindrops roll off quickly, reducing fabric wet-out and weight gain. Easier to clean with lower upkeep—better value over time.
  
  
• 10K / 10K Waterproof–Breathable Performance
  10,000 mm hydrostatic head blocks short showers and gusts; 10,000 g/m²/24h breathability vents built-up moisture on climbs and fast walks to cut down on that “boil-in-the-bag” feeling and improve comfort.
  
  
• 3/4-Length Zip = Fast On + High-Flow Venting
  The half-zip style lets you throw it on fast at the bus stop, a windy pass, or camp. Crack the zipper on the move for quick heat dump without sacrificing coverage.
  
  
• Dual-Side-Zip Kangaroo Pocket = Front-Centered EDC Layout
  Entry from either side stays accessible even with a sternum strap. Capacity fits map / phone / gloves / power bank, reducing pack on/off cycles.
  
  
• Adjustable Hood, Clear Sightlines
  Fine-tunes to your head for face coverage without tunnel vision; the brim won’t block views or map reading—equally at home in the city and the hills.
  
  
• Lightweight & Packable, Great Value
  Main fabric 100% Nylon (≈105 g/m²), size L ≈ 268 g. Compresses into side/top pockets; throw on when wind or showers hit—an excellent balance of protection, packability, and cost.

FAQ

1. How does it differ from a traditional hardshell?
   Levanter is lighter, more compact, and simpler—ideal for short showers and daily commute / day-hike use. For sustained, high-intensity rain as your primary shell, choose a membrane hardshell.
   
   
2. How should I layer it?
   Run a wicking base layer + insulating mid layer + Levanter as the outer shell. Stash it when skies are clear; deploy it when weather turns—high mobility, great value.
   
   
3. Will the kangaroo pocket clash with a pack’s sternum strap?
   The dual side-zip openings allow easy access even with the strap fastened, keeping front-access flow quick and efficient.
   
   
4. Is it good for bike commuting or urban wear?
   Yes—wind resistant, water-repellent, easy to vent, and clean-looking. Great as a travel backup layer too.
   
   
5. How do I maintain the water-repellent finish?
   DWR diminishes over time; periodically refresh it with a PFC-free DWR treatment to keep beading and surface cleanliness high.

Use-Case Ideas

• City commute: keep it in your pack; throw on for sudden showers or strong winds.
• Hiking / day trips: a reliable layer for windy saddles and brief rain; micro-vent with the zipper for precise temperature control.
• Travel backup: lightweight and compressible with a low baggage footprint—ideal for unstable forecasts.
• Outdoor photography: wind chill protection while waiting; kangaroo pocket fits filters / cloth / spare battery.
• Tactical-inspired styling: clean anorak silhouette pairs with technical pants and vests—function meets form.

How to Measure (measure over a base layer)

1. Chest: measure horizontally at the fullest part, tape level with the floor.
2. Waist: measure at the narrowest point while breathing naturally—don’t overtighten.
3. Hips: measure horizontally at the fullest part, keeping the tape straight.
4. Height: stand naturally against a wall; use as a general proportion reference.

Size Chart (Body Measurements | cm)

Specifications

Care

• Prefer spot clean with a damp cloth; avoid machine wash, dry cleaning, tumble drying, and bleach. Air-dry.
• Periodically refresh with a PFC-free DWR treatment to maintain beading and stain resistance.
• Store in a cool, dry place; avoid long-term compression and moisture to prolong service life.